Deprecated: preg_replace(): The /e modifier is deprecated, use preg_replace_callback instead in /customers/e/4/0/ : runtime-created function on line 3 Removing old driver from snell k/II speakers
The Snell Community
March 24, 2018, 10:55:32 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
   Home   Help Search Login Register  
Pages: [1]
Author Topic: Removing old driver from snell k/II speakers  (Read 446 times)
Just getting started
Posts: 2

« on: June 06, 2017, 03:17:22 PM »

Hi.  I need help removing the old drivers from my KII speakers.  They don't want to come out easily.  Any tips?  Thanks very much.
Full Member
Posts: 140

« Reply #1 on: June 06, 2017, 10:04:37 PM »

They should come out fairly easily.  They will be stuck to the cabinet, because of some mastic type material.  The technique I used was to remove the screws from the speakers.  Then take an allen wrench that will go into one of the screw holes.  Since the allen wrench is L shaped, you can get it to hook under the hole and pull gently.  Don't force it too hard, but pull.  Once it starts to move, you can then go around the speaker with a large flat blade screwdriver and pry it off.  Be careful not to mark the cabinet facing.
Pages: [1]
Jump to:  

Powered by MySQL Powered by PHP Powered by | © 2008-2013
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Valid XHTML 1.0! Valid CSS!